$47.00

The most important features of CMM-10 are:

  • Autoranging/manual range selection.
  • DATA HOLD function, for holding measured values.
  • REL function, which allows you to make measurements relative to a stored reference value.
  • Continuity test with acoustic signalling (beeper).
  • AUTO-OFF function.
  • Display 3 7/8 digits (5000 max).

4 in stock

Category: Tag:
Frequency measurement

RangeResolutionAccuracy
5.000 Hz0.001 Hz ±(1.5% m.v. + 5 digits)
50.00 Hz0.01 Hz
500.0 Hz0.1 Hz±(1.2% m.v. + 3 digits)
5.000 kHz0.001 kHz
50.00 kHz0.01 kHz
500.0 kHz0.1 kHz
5.000 MHz0.001 MHz±(1.5% m.v. + 4 digits)
10.00 MHz0.01 MHz
  • sensitivity: ≥8 V RMS

Duty cycle measurement

RangeResolutionAccuracy
0.1 to 99.9%0.1%±(1.2% m.v. + 2 digits)
  • sensitivity: ≥8 V RMS,
  • pulse width: 100µs to 100 ms,
  • frequency width: 5 Hz to 150 kHz.

Temperature measurement

RangeResolutionAccuracy*
-20°C to +760°C1°C±(3% m.v. + 5°C, 9°F)
-4°F to +1400°F1°F

*) probe (K type) accuracy not included

DC voltage measurement

RangeResolutionAccuracy
400.0 mV0.1 mV±(0.5% m.v. + 2 digits)
4.000 V0.001 V±(1.2% m.v. + 2 digits)
40.00 V0.01 V±(1.2% m.v. + 2 digits)
400.0 V0.1 V
600 V1 V±(1.5% m.v. + 2 digits)
  • input impedance: 7.8 MΩ

AC voltage measurement

RangeResolutionAccuracy
400.0 mV0.1 mV±(1.5% m.v. + 70 digits)
4.000 V0.001 V±(1.2% m.v. + 3 digits)
40.00 V0.01 V±(1.5% m.v. + 3 digits)
400.0 V0.1 V
600 V1 V±(2.0% m.v. + 4 digits)
  • input impedance: 7.8 MΩ,
  • frequency range: 50 to 400 Hz.

DC current measurement

RangeResolutionAccuracy
400.0 μA0.1 μA±(1.0% m.v. + 3 digits)
4,000 μA1 μA±(1.5% m.v. + 3 digits)
40.00 mA0.01 mA
400.0 mA0.1 mA
4.000 A0.001 A±(2.5% m.v. + 5 digits)
10.00 A0.01 A

AC current measurement

RangeResolutionAccuracy
400.0 μA0.1 μA±(1.5% m.v. + 5 digits)
4,000 μA1 μA±(1.8% m.v. + 5 digits)
40.00 mA0.01 mA
400.0 mA0.1 mA
4.000 A0.001 A±(3.0% m.v. + 7 digitgs)
10.00 A0.01 A
  • frequency range: 50 to 400 Hz.

Resistance measurement

RangeResolutionAccuracy
400.0 Ω0.1 Ω±(1.2% m.v. + 4 digits)
4.000 kΩ0.001 kΩ±(1.0% m.v. + 2 digits)
40.00 kΩ0.01 kΩ±(1.2% m.v. + 2 digits)
400.0 kΩ0.1 kΩ
4.000 MΩ0.001 MΩ
40.00 MΩ0.01 MΩ±(2.0% m.v. + 3 digits)

Capacitance measurement

RangeResolutionAccuracy
40.00 nF0.01 nF±(5.0% m.v. + 7 digits)
400.0 nF0.1 nF±(3.0% m.v. + 5 digits)
4.000 μF0.001 μF
40.00 μF0.01 μF
100.0 μF0.1 μF±(5.0% m.v. + 5 digits)

“m.v” = measured value

Electric security:

  • type of insulation: double, according to EN 61010 – 1 and IEC 61557
  • measurement category: CAT II 600 V acc. to EN 61010 – 1:2004
  • protection class acc. to EN 60529: IP40

Other technical data:

  • power supply: 9 V battery type 6LR61
  • diode test: I=0.3 mA, V0 = 1.5 V DC
  • continuity test: I<0.3 mA, sound signal for R<50 Ω
  • over range indication: 0L displayed
  • sampling rate: 2 times per second
  • input impedance: 7.8 MΩ (V AC/DC)
  • display: 5000 counts LCD display with function indication
  • dimensions: 5.5″ x 2.7″ x 1.5″ / 138 x 68 x 37 mm
  • weight: approx. 0.5 lbs / 210 g
  • fuses: mA, µA range: 0.5 A/250 V fast; A range: 10 A/250 V fast
  • auto power OFF: 30 min.
  • accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032

Rated operational conditions:

  • operating temperature: 32 F to 122 F / 0 to +50°C at <70% rel. humidity
  • storage temperature: -4 F to 140 F / -20 to +60°C at <80% rel. humidity

Additional information

Weight1.1 lbs
Dimensions2 × 6.5 × 9.5 in

Reviews

There are no reviews yet.

Be the first to review “CMM-10 Multimeter”

Your email address will not be published. Required fields are marked *