$5,150.00

The MIC-10s1 is a portable, rugged, easy-to-use, 10kV class insulation test meter.  The MIC-10s1 has a wide measurement range, selectable test voltages, and excellent safety features.

2 in stock

 

Performance and Features:

  • Insulation resistance to 40.0 TΩ
  • User-selectable test voltage any from 50 V to 1,000 V (with 10 V resolution) and 1,000 V to 10,000 V (with 25 V resolution)
  • Continuous indication of measured insulation resistance or leakage current
  • Audio beeps every five-second periods to indicate measurement progress
  • Indication of actual test voltage during measurement
  • 1.2 mA, 3 mA and 5 mA test current
  • Step voltage and ramp voltage insulation resistance measurements (SV) (RV)
  • Selectable test times (T1, T2, T3 from 1 to 600 seconds) to measure one or two absorption coefficients
  • Adjustable measuring time to 99′ 59’’
  • Polarization index (PI) and dielectric absorption ratio (DAR) measurements
  • Dielectric Discharge calculation (DD)
  • Digital filters function for measurements in high-noise environment (10 s, 30 s, 60 s)
  • High-noise immunity, up to 1550 V (induced)
  • Adjustable limit settings for measured resistance RISO
  • Measurement of capacitance during the measurement of RISO
  • DC and AC voltage measurement in the range of 0 V to 600 V
  • Graphical display of R and V, or R and I, plots the progress of test in real-time, and final graph (see example below)
  • Meter conforms to EN 61557

Safety First:

  • CAT-IV 600V, CAT-III 1000V
  • Automatic discharge of tested object after measurement completes to remove high voltage charges remaining on cable
  • Protection against measuring live objects, measurement will not proceed
  • Measurements with test leads up to 180 ft / 55 m length

Construction:Graphical display

  • Backlit keyboard and graphical display
  • Rugged IP 54 case – protected from water spray from any direction

Power Supply:

  • Bult-in battery pack, low battery warning indicator, built-in fast charger
  • AC power: 90 V to 260 V, 50 Hz / 60 Hz

Memory:

  • 990 cells of memory (11,880 records) to save test results
  • Wireless data transmission to a PC with Bluetooth®, or via USB cable

 Press article:

Sonel introduces new models of insulation resistance meters.

 

Test drive the MIC 10k1 with this Online Simulator:

 

Insultaion Resistance Measurement

Measurement range acc. to IEC 61557-2: VN = 10,000V: 10.00MΩ to 40.0TΩ

Measurement with DC and increasing voltage (SV) for UISO = 10 kV

RangeResolutionAccuracy
0.0 to 999 kΩ1 kΩ±(3% m.v. + 10 digits)
1.00 to 9.99 MΩ0.01 MΩ
10.0 to 99.9 MΩ0.1 MΩ
100 to 999 MΩ1 MΩ
1.00 to 9.99 GΩ0.01 GΩ
10.0 to 99.9 GΩ0.1 GΩ
100 to 999 GΩ1 GΩ±(3.5% m.v. + 10 digits)
1.00 to 9.99 TΩ0.01 TΩ±(7.5% m.v. + 10 digits)
10.0 to 20.0 TΩ0.1 TΩ±(12.5% m.v. + 10 digits)
 10.0 to 40.0 TΩ

Approximate maximum values of the measured resistance, depending on the test voltage

Voltage VISOMeasurement rangeMeasurement range with AutoISO-5000
50 V200 GΩ20.0 GΩ
100 V400 GΩ40.0 GΩ
250 V1.00 TΩ100 GΩ
500 V2.00 TΩ200 GΩ
1,000 V4.00 TΩ400 GΩ
2,500 V10.00 TΩ400 GΩ
5,000 V20.0 TΩ400 GΩ
10,000 V40.0 TΩ

AC/DC voltage measurement

RangeResolutionAccuracy
0.0 to 29.9 V0.1 V±(2% m.v. + 20 digits)
30.0 to  299.9 V0.1 V±(2% m.v. + 6 digits)
300 to 750 V1 V±(2% m.v. + 2 digits)
  • Frequency range: 45 to 65Hz

Capacitance measurement 

Display rangeResolutionAccuracy
1 to 999 nF1 nF±(5% m.v. + 5 digits)
1.00 to 49.99 µF0.01 µF
  • Measurement of capacitance is available only during RISO measurement (when discharging the object).
  • Accuracy of measurement is met for tested capacitance connected in parallel with a resistance greater than 10 MΩ
  • For measurement voltages below 100 V accuracy is not specified

Temperature measurement 

Display rangeResolutionAccuracy
-40.0 to 99.9 °C1 °C±(3% m.v. + 8 digits)
-40.0 to 211.8 °F1 °F±(3% m.v. + 16 digits)

Electric security

  • type of insulation: double, according to EN 61010-1 and IEC 61557
  • measurement category: CAT IV 600 V (CAT III 1000 V) according to EN 61010-1
  • protection class acc. to EN 60529: IP40 (IP67 with closed cover)

Other technical data

  • Power supply from: battery 12V or from electric grid 90 V to 260 V, 50 Hz / 60 Hz
  • weight: ca. 15.5 lbs / 7 kg
  • dimensions: 15.35″ x 12.2″ x 7.09″ / 390 x 310 x 180 mm
  • display: LCD 5,6’’ graphical
  • data transmission: USB cable or Bluetooth®

The acronym “m.v.” stands for a “measured reference value”.

Additional information

Weight18 lbs
Dimensions12 × 16 × 13 in

Reviews

There are no reviews yet.

Be the first to review “MIC-10S1 Insulation Resistance Meter”

Your email address will not be published. Required fields are marked *